Back to top

Tile Adhesive

Tile adhesive is a high-purity compound utilized to bond tiles to various surfaces such as concrete floors and pavements. It typically comes in powder form, commonly gray or white in color. Products like Fosroc Patchroc Powder and Conbextra Tie Rod Grout fall under this category. These adhesives offer fast-setting properties, allowing quick repairs. Their high purity ensures reliable adhesion, while specific attributes include excellent durability, water resistance, and strong bonding capabilities. Whether for indoor or outdoor applications, tile adhesive provides a reliable solution for securing tiles swiftly and effectively, ensuring long-lasting and aesthetically pleasing results.

Fosroc Patchroc Powder

  • Application:Patchroc has been specially designed to provide a fast set repair in concrete floors and pavements
  • Color:GREY
  • Other Names:Fosroc Patchroc Powder
  • Physical State:Powder
  • Purity:High
  • Supply Ability:5000 Per Month
Price: 900 INR/Kilograms

Conbextra Cable Grout HS

  • Color:White
  • Other Names:Conbextra Cable Grout HS
  • Physical State:Powder
  • Purity:High
  • Supply Ability:5000 Per Month
Price: 364 INR/Bag

Cebex 100 Expanding Grout

  • Application:Construction
  • Color:Gray
  • Other Names:Cebex 100 Expanding Grout
  • Physical State:Powder
  • Purity:High
  • Supply Ability:5000 Per Month
Price: 54 INR/Pack

Conbextra Tie Rod Grout

  • Application:Construction
  • Color:White
  • Other Names:Conbextra Tie Rod Grout
  • Physical State:Powder
  • Purity:High
  • Supply Ability:5000 Per Month
Price: 346 INR/Bag

Conplast SP 430

  • Application:Industrial
  • Other Names:Conplast SP 430
  • Physical State:Liquid
  • Purity:High
  • Supply Ability:5000 Per Month
Price: 12000 INR/Dram

Conbextra Cable Grout

  • Color:White
  • Grade:Industrial Grade
  • Other Names:Conbextra Cable Grout
  • Physical State:Powder
  • Purity:High
  • Supply Ability:5000 Per Month
Price: 364 INR/Bag

ARDEX ENDURA SILVER STAR

  • Application:*Sufficiently flat to permit the specified flatness of finished tiling, bearing in mind the permissible thickness of the adhesive. * Suitable for tiling in the service conditions to which it will be exposed. * Surfaces to be tiled must be dry, clean and free from loose material and contamination.
  • CAS No:32149090
  • Color:GREY
  • Other Names:SILVER STAR
  • Physical State:Powder
  • Usage:Construction
Price: 355 INR/Bag

Ardex Enduar Gold Star

  • CAS No:32149090
  • Color:GREY
  • Other Names:GOLD STAR
  • Physical State:Powder
  • Usage:Packing
Price: 520 INR/Bag

Ardex Endura Diamond Star Tile Adhesive

  • Application:1. Spread not more than the area which can be tiled within the open time of the adhesive. 2. Comb the adhesive to the required depth using a suitable square notch trowel. 3. Press the tiles firmly into position with a slight twisting action, checking periodically that good contact is maintained with the back of each tile. Leave no voids behind tiles. 4. Tiles should be fixed within 20 minutes of adhesive being applied, depending on the porosity of the surface and atmospheric conditions. Tiles can be adjusted up to 15 - 20 minutes after fixing. Touch the adhesive ribs periodically and if a skin has formed, remove the adhesive and apply a new layer. 5. Leave adequate joints between individual wall and floor tiles unless self spacing tiles are used. 6. Clean off surplus adhesive from the tile face and between joints.
  • Other Names:Tile Adhesive
  • Physical State:Powder
  • Purity:99%
  • Usage:Construction, Other
  • Supply Ability:2000000 Per Month
Price: 433 INR/Bag

Roff Glass Tile Adhesive

  • Application:1 Test the Sealer initially on a small inconspicuous area. 2 Ensure the surface is clean. Use suitable cleaner to remove any cementitious deposits. 3 Following cleaning, thoroughly rinse with clean water and allow the area to completely dry out for approx. 3 days. 4 Apply HEAVY DUTY IMPREGNATING TILE & STONE SEALER to the surface using a soft bristle brush or a fluff free cloth and leave it to soak for approx. 5 minutes. Wipe off any surplus sealer remaining on the surface. 5 Two or more coats as necessary depending on the porosity. Allow 2 hours of drying time between coats. 6 The floor can be trafficked 24 hours after the final coat depending on the condition
  • Other Names:HEAVY DUTY IMPREGNATING TILE & STONE SEALER
  • Physical State:Powder
  • Purity:99%
  • Usage:Construction
  • Supply Ability:2000000 Per Month
Price: 1050 INR/Bag
X


"We deal only in Gujarat"